|
|
The Design of Deep Cut Securing
Štainerová, Lenka ; Boštík, Jiří (referee) ; Glisníková, Věra (advisor)
The aim is to design economical and above all safe securing a deep notch, both in the construction phase and throughout the use of the building. In the first part of the thesis Background research will be given an idea of the construction of the geotechnical point of view. The second part will contain the geotechnical design calculation. The third part will be proposed safety recommendations in terms of geotechnical monitoring.
|
|
|
The family house
Moudrá, Aneta ; Janíček, Vít (referee) ; Benešová, Romana (advisor)
The subject of presented thesis is preliminary design of a detached house with workshop, as a design documentation for future building construction. The building is located on sloping land in the village Litohrady and consists of a basement and one above ground floor. The workshop is located on the ground floor. Roofing is solved by warm flat roof construction with an inverted roof assembly. Vertical structure and horizontal load-bearing structures are made out of Ytong system, perimeter masonry of the basement floor is made out of concrete blocks of permanent formwork Best. Construction of the house is based on footings. The main entrance to the house is designed to be in the basement, workshop has its own separate entrance on the ground floor. In the basement there is a living area and utility room with double car garage. The ground floor of the house holds a private zone and workshop. Proposal for the house construction emphasizes the layout design, architectural and construction solutions to energy savings and safety in use.
|
|
|
Storage hall No. 2 in Rousínov - construction-technological project
Gottvaldová, Denisa ; Valenta, Michal (referee) ; Biely, Boris (advisor)
The subject of my diploma thesis is a construction-technological solution for realization of a storage hall in Rousínov. The work deals with a time and financial plan for all buildings of the project Storage Hall, Rousínov. A technical report, a study of the implementation of the construction’s individual stages, a design and assessment of transport routes, a design of the construction site equipment and a design of the machinery were prepared for the building No. 2. An itemized budget with a statement of acreage and construction schedule was prepared. A technological regulation and a control and test plan were prepared for the implementation process of the wire-reinforced concrete industrial floor. Within the diploma thesis, a technological regulation for the implementation of a reinforced concrete retaining wall was prepared. Noise pollution caused by the construction site was examined and evaluated in a noise study. The environmental requirements for the storage hall building No. 2 were processed.
|
|
| |
|
|
Design of excavation in the Brno city centre
Kováč, Vladimír ; Miča, Lumír (referee) ; Chalmovský, Juraj (advisor)
The work deals with the problem of the ultimate and serviceability limit state of a once-anchored retaining structure of an excavation on Krenova street in Brno. The calculation of the ultimate limit state is solved manually and provides an input into the serviceability limit state, which is solved by means of a numerical analysis using a finite element method. To calculate the serviceability limit state, these constitutive models: Mohr-Columb, Hardening soil and Hardening soil small strain model are used.
|
|
|
Determination of input parameters of advanced soil constitutive models using optimization methods
Koudela, Pavel ; Miča, Lumír (referee) ; Chalmovský, Juraj (advisor)
Choice of the constitutive model and determination of input parameters are necessary for a successful application of numerical methods in geotechnical engineering. Higher complexity of modern constitutive models results in an increase of the number of input parameters and time requirements for their calibration. Optimization methods are a possible solution for this problem. An application in which metaheuristic optimization method Particle swarm optimization (PSO) is involved is presented in this thesis. Critical review and testing of various PSO alternatives was performed in the first part of this thesis. The most efective PSO alternatives were chosen. In the second part connection between PSO algorithm and finite element solver was prepared. Automatization of determination of constitutive models input parameters was performed on three boundary value problems: laboratory test (oedometer), in-situ test (pressuremeter) and geotechical construction (retaining wall). Three types of constitutive models are used. Linear elastic-perfectly plastic Mohr-Coulomb model, elastoplastic non-linear Hardening soil model and Hardening soil - small strain model.
|
|
|
House on a Sloping Building Site
Pánková, Aneta ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The subject of my bachelor´s thesis is to design a house on a sloping building site at a level of project documentation for the buidilng realization. The building object is located in the village of Velke Porici and designed for a family of four. The building has a basement with a one above-ground floor with a wall construction system of brick blocks. Foundation of the house is done on the strip foundations and the house is covered with a flat roof. Entry to the house is solved trough the above-ground floor where there is a rest area. In the basement spaces is a daily part of the house. The building project is completed in accordance with layout, architecture and structural design and safety in use.
|
|
|
The Design of RC Structure of Residential House
Hrvolová, Markéta ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
The aim of the diploma thesis is static solution of selected parts of the residental house with formwork drawings and reinforcement drawings of designed structures included. Project describes the design and assessment of the monolitic slab structure, precast stair flights, basement loadbearing wall and retaining wall. For calculation of the internal forces was used software Scia Engineer.
|
|
|
Renewal of the limekiln in Grygov
Venglář, Václav ; Muroň, Ivo (referee) ; Ležatka, Lukáš (advisor) ; Kalousek, Lubor (advisor)
The aim of this bachelor’s thesis is to design restoration of the Grygov limekiln and to find new use for it and its surroundings. The building is not listed as historical monument, however according to the assignment it is treated as if it was. The project proposes to use the building as a multifunctional object with seasonal service for taking place of social and cultural events with use of the building’s surroundings. The restoration method is pluralistic. The aim is to capture the existing state, restore selected construction and its elements and to bring new objects to fulfil legal requirements. New objects correspond to the technical essence of the building and existing materials. The interventions are designed to be reversible if possible. The proposed interventions help the object to fulfil its potential as important spot near the city of Olomouc.
|
|
|
Radňovice bypass - Location study
Polický, Radek ; Janda, Michal (referee) ; Radimský, Michal (advisor)
The aim of this work is to design variant solution Radňovice bypass of the village. Radňovice is located in the county Vsočina. Road I/19 which is conecting Nové Město na Moravě and Žďár nad Sázavou runs through the center of the village. Road I / 19 provides connections with surrounding villages and transport operators of the adjacent buildings. Most vehicles will only Radňovice crossed. Prospective route for the realignment of the road outside the buildings has tracked for a long time.They were proposed three variants, one of which was selected for detailed processing. There was measured actual traffic flow intensity and rating of perspective traffic intensity for newly designed state.
|
guest ::
